Dr. N. Sateesh


Profile

Dr. N. Sateesh graduated in Mechanical Engineering from Nagarguna University AP, 1992. He has done his master degree from JNTUH, Hyderabad 2002 in CAD/CAM specialization. He has awarded doctorate degree in Mechanical Engineering from Osmania University, Hyderabad, 2010. He has 6 years of industrial experience and 19 years of experience in teaching and research. His area of research in CAD/CAM, composite materials, modelling and simulation. He has published more than 35 papers in international journals and conferences. He is guided 14 M.Tech students. Guiding 2 M.Tech and 2 Ph.D students. He is the Professor & Dean Alumni, GRIET.

Dr N. Sateesh was holding the position of NBA coordinator for M.Tech (Design for Manufacturing) from 2015 to 2018. M.Tech (DFM) is accredited for two years 2016-2018. He has also coordinator for M.Tech (DFM). He framed the DFM curriculum of regulation GR18. He is head of design stream in the department since 2015. He had organized four workshops/FDP programs as convener since 2015. He is a fellow Institute of Engineers (life member), Life member of the Institute of Indian Foundry Men and member of ASME. Currently he is the Dean Alumni in GRIET.

Contact details:

Dr. N Sateesh

Professor & Dean

Department of Mechanical Engineering

Gokaraju Rangaraju Institute of Engineering and Technology

Bachupally, Hyderabad-500090, India

Email:sateesh.nagari1@gmail.com

Curriculam Vitae

CV

Educational qualifications:

  • PhD in Mechanical Engineering , University College of Engineering, Osmania University, Hyderabad, India (2004-2010.
  • M.Tech in CAD/CAM specialization qualified with distinction from university college of Engineering, JNTUH, Hyderabad, India(2002-2004)
  • B.Tech in Mechanical Engineering qualified with distinction from Nagarjuna University, Andhra Pradesh, India (1988-92).

Professional Experience: 25 years+

  1. Teaching (From latest position)
  • Professor, ME, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad 30/07/2014-Continuing
  • Professor & Principal Vijay College of Engineering for Women, Nizamabad, AP, India from 11/08/2010 to 26/07/2014
  • Professor, Vijay Rural Engineering College, Nizamabad, AP, India, from 16/03/2010 to 10/08/2010
  • Associate Professor, Vijay Rural Engineering College, Nizamabad, AP, India from 1/11/2002 to 15/03/2010
  • Assistant Professor, Vijay Rural Engineering College, Nizamabad, AP, India from 1/11/199931/10/2002

2. Industry

  • Planning Engineer, Kitti Steels Ltd, Hyderabad, India, since May 1994 to Nov 1999
  • Trainee Engineer, Praga Tools Ltd, Hyderabad, India, 1993-1994

Contribution in Teaching

Subjects Teaching

  • Machine Design
  • CAD/CAM
  • Finite Element Methods
  • Engineering Mechanics
  • Machine Drawing
  • Engineering Drawing
  • C& Data structures

Laboratories erected and conducted

  • CAD/CAM Lab
  • IC Engines Lab
  • Heat Transfer Lab
  • Production Lab
  • MMS Lab

Administrative experience

  • Dean Alumni, Gokaraju Rangaraju Institute of Engineering and Technology from 01/11/2021 to Till Date
  • Head of the Department, Mechanical, Gokaraju Rangaraju Institute of Engineering and Technology from 24/12/2018 to 31/10/2021
  • Head of the Institute, Vijay Rural Engineering College, Nizamabad, AP, India, from 16/03/2010 to 10/08/2010.
  • Head of the Institute, Vijay College of Engineering for Women, Nizamabad, AP, India from 11/08/2010 to 26/07/2014.
  • Chief Superintendent of University and Government exams since March 2010 to July 2014.
  • AICTE approval process work, Vijay College of Engineering for Women, Nizamabad, AP, India since 2010 to 2014.
  • JNTUH affiliation work, Vijay College of Engineering for Women, Nizamabad, AP, India since 2010 to 2014.
  • Department NBA coordinator for M Tech (DFM), Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad since August 2015 to till date.
  • Industry–Institute Interaction Coorninator (IIIC), Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad since August 2015 to till date.
  • Department M. Tech coordinator for M Tech (DFM), Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad since July 2018 to till date.
  • Department Design stream in-charge, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad since June 2016 to till date.
  • CAD/CAM lab in-charge, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad since 2015 to till date.

Committee Member:

  • Project Review Committee (PRC) member for M.Tech (DFM)
  • Organizing committee member of International Conference on Material Processing and Characterization (ICMPC) organized annually.

Sponsored Projects

SPONSORED PROJECTS:

DST-SERB: (EMRF) “MANUFACTURING OF DESIGNED COMPLEX PRODUCTS USING FUSED DEPOSITION MODELLING (FDM) TECHNIQUE”, Rs 12,86,400=00-Under Review

Publications

I. INTERNATIONAL JOURNALS:

1. N. Sateesh and C.S.P. Rao, Design Optimization and Manufacturing of Plate-Cams using NURBS, International Journal for Manufacturing Science and Technology (IJMST), Publisher: Advance Manufacturing Solutions Co Ltd., Toledo Ohio USA, 2005, Vol. 8, No.1,pp. 45-58.ISSN 1524-1548 (Impact factor:1.3210)

2. Sateesh, N., Rao, C.S.P. and Janardhan Reddy, T.A., Optimization of Cam-Follower Motions using B-Splines, International Journal of Computer Integrated Manufacturing (IJCIM), Publisher: Taylor & Francis, England, June 2009,Vol.22 No.6, PP. 515- 523.(Impact factor: 1.019) (SCI journal)

3. S. Dheeraj, N. Sateesh, A.L. Choudhary and U.D. Joshi, Application of Porous Material (Zeolite y) In Water Treatment, International Journal of Materials Science (IJoMS), Publisher: Research India Publications, 2010, Vol.5 No.6, PP. 839-846.

4. N.Sateesh, Improvement in Motion Characteristics of Cam-Follower Systems Using NURBS, International Journal on Design and Manufacturing Technologies, Chennai, India July, 2014, Vol8, Issue 2. (ISSN No. 0973-9106), pp.15-21.

5. Eshwara K. Prasad, Raman R. Goud, Swadesh Kumar Singh, and N. Sateesh, Construction of Strain Distribution Profiles of EDD Steel at Elevated Temperatures, International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering Vol:9, No:12, 2015, pp. 1320-1326, World Academy of Science, Engineering and Technology(Impact Factor=2.215)

6. Doneti Gopi Krishna, Sravan Sashank, Kosaraju Satyanarayana, N. Sateesh, Juluru Pavanu Sai “Influence of Cutting speed on Surface Roughness and Cutting Forces for Steel Materials by using Carbide Insert Tool Bit in Turning Operation” IJIRST–International Journal for Innovative Research in Science & Technology| Volume 3 Issue 05 | October 2016 ISSN (online): 2349-6010,PP.7-17

7. P. Giridhar, Kosaraju Satyanarayana, Dr Ram Subbiah, N. Sateesh, “Impact of CrN PVD Coating Thickness on 316l Austenitic Stainless Steel Wear Resistance” IJIRST–International Journal for Innovative Research in Science & Technology| Volume 3 Issue 05 | October 2016 ISSN (online): 2349-6010,PP.p96-99.

8. Megavath Vijay Kumar, Doneti Gopi Krishna, Kosaraju Satyanarayana, N. Sateesh, “Experimental and Finite Element Simulation in Turning Inconel 625 with CNMG Carbide Insert”, IJIRST –International Journal for Innovative Research in Science & Technology| Volume 4 | Issue 5 | October 2017, ISSN (online): 2349-6010,pp.13-22

II. INTERNATIONAL CONFERENCES:

1. N. Sateesh, C.S.P. Rao, and T.A. Janardhan Reddy, Optimization of Cam-Follower Motion using B-spline Polynomials, 17 th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM-2007), , Philadelphia, U.S.A, June 18-20, 2007, Vol. 1, pp. 205-210.

2. N. Sateesh, C.S.P. Rao, and T.A. Janardhan Reddy, Synthesis of Cam-Follower Velocity Profile using B-spline, International Conference on Advanced Design and Manufacturing (ICADM-2007), Sethu Institute of Technology, Tamilnadu, India, 9-11, August 2007, pp. 398-402.

3. N. Sateesh, C.S.P. Rao, T.A. Janardhan Reddy, and A Padmarao, Optimization of Plate Cam Size, International Conference on Fascinating Advancement in Mechanical Engineering (FAME-2008), Mepco Schelenk Engineering College, Sivakasi, Tamilnadu, India, 11-13, December, 2008, pp.381-386.

4. N.Sateesh, C.S.P. Rao, K.Prashanth Reddy, and R.Raman Goud, Design of Cam- Follower Mechanisms Using Rational B-Splines, International Conference on Advanced Materials and Manufacturing Technologies (AMMT), JNTUH, Hyderabad, India, 18-20, December, 2014, pp. 184-192.

5. Pudiri Madhu, N.Sateesh, Neela Praveen, and Karampuri Satish, Modeling and Simulation of Fins for 150cc Engine, 1 st International Conference on Advances in Engineering, SITICAiE–2015, S. P. B. Patel Engineering College and Saffrony Institute of Technology, Ahmedabad, India, 22-23, January 2015, pp.24-28.

6. N.Sateesh, P.Sampath Rao, D.V.Ravishanker, and K. Satyanarayana, Effect of Moisture on GFRP Composite Materials, 4th International Conference on Materials Processing and Characterization Elsevier-Material today Proceedings 2 (2015) pp.2902–2908.(Scopus indexed)

7. M. Ashok Kumar, A.M.K. Prasad, D.V. Ravishankar, N. Sateesh, and D. Ravi, Effect of indenter displacement on angle plied composite plates subjected to quasi-static loading, 4th International Conference on Materials Processing and Characterization Elsevier-Material today Proceedings 2(2015) pp. 2938 – 2943. .(Scopus indexed)

8. V.Balaji, N.Sateesh, and M.Manzoor Hussain, Manufacture of Aluminium Metal Matrix Composite (Al7075-SiC) by Stir Casting Technique, 4th International Conference on Materials Processing and Characterization (IJMPC-2015), Elsevier- Proceedings 2 (2015) 3403–3408. .(Scopus indexed)

9. N.Sateesh, C.S.P. Rao, K.Satyanarayna, and C.Rajashekar, A Design System for Complex Profiles of Machine Members Using a Synthetic Curve, 18 th International Conference on Sustainable Urban Environment (ICSUE-2016), 4-5 February 2016World Academy of Science, Engineering and Technology, Melbourne, Australia, pp.369-372.

10. K.Satyanarayana, N.Sateesh, and A. Venugopal “Experimental Studies on the Effect of Rake Angle on Turning Ti-6Al-4V with TiAlN Coated Carbides” in an International Conference Titled “18th International Conference on Mechanical, Automotive & Aerospace Engineering.” 4-5 February 2016, World Academy of Science, Engineering and Technology, Melbourne, Australia,pp.434-438

11. L. Siva Rama Krishna, Natrajan Mahesh, and N.Sateesh, Topology optimization using solid isotropic material with penalization technique for additive manufacturing, 5th International Conference on Materials Processing and Characterization (IJMPC- 2016), Elsevier- Materials Today: Proceedings 4 (2017) 1414-1422. .(Scopus indexed)

12. Kundavarapu Vengalrao, Kopparthi Phaneendra Kumar, D.V.Ravi Shanker, Nadendla Srinivasababu, and N.Sateesh, An Investigation on RTM Process Parameters and their Influence on Impact Failure Behavior of FRP Laminates 5th International Conference on Materials Processing and Characterization (IJMPC-2016), Elsevier- Materials Today: Proceedings 4 (2017) 2167-2173. .(Scopus indexed)

13. V.Rajesh, P.M. V Rao, and N.Sateesh, Investigation of Carbon Composites Subjected to Different Environmental Conditions, 5th International Conference on Materials Processing and Characterization (ICMPC-2016), Elsevier-Materials Today: Proceedings 4 (2017) 3416–3421. .(Scopus indexed)

14. S. Gauthami, and N Sateesh, “Performance analysis of Canola based oil Nanofluid as lubricant in turning of EN19 steel”,1st International Conference on Innovations in Mechanical Engineering(ICIME-2018)5-6 January 2018, GNIT, Hyderabad, pp. 272- 278.

15. S. Swapna, R. Karthikeyan, N. Sateesh, “Analysis of Mechanical Properties ofnPolymer based Nano Fly ASH composite”, , 1st International Conference on Innovations in Mechanical Engineering(ICIME-2018)5-6 January 2018, GNIT, Hyderabad, pp 49-54

16. N.Sateesh, V. Rajesh, P.M.V. Rao, K. Satyanarayana, B. Mahesh Babu “Thermal analysis of Carbon Composites Subjected to Various Atmospheric Conditions” 7th International Conference on Materials Processing and Characterization (ICMPC- 2017), Elsevier-Proceedings, 17-18th March 2017Materials Today: Proceedings 5 5768–5773.(Scopus indexed)

17. Satyanarayana.Kosaraju, Vijay Kumar.M and Sateesh.N “Optimization of machining parameters of turning Inconel 625” 7th International Conference on Materials Processing and Characterization (ICMPC-2017), Elsevier- Materials Today: Proceedings 5 (2018) 5343–534. .(Scopus indexed)

18. Satyanarayana.Kosaraju, Vijay Kumar.M and Sateesh.N “Optimization of Machining Parameters in Turning of Al6063A-T6 using Taguchi-Grey Analysis” 8th International Conference on Materials Processing and Characterization (ICMPC-2018), Elsevier- Materials Today: Proceedings 5 (2018) 20104–20109. (Scopus indexed)

19. Ratna Deepika Manikonda, Satyanarayana Kosaraju*, Arul Raj K, Sateesh N “Wear Behavior Analysis of Silica Carbide Based Aluminum Metal Matrix Composites” 8th International Conference on Materials Processing and Characterization (ICMPC- 2018), Elsevier- Materials Today: Proceedings 5 (2018) 20104–20109. (Scopus indexed)

III.NATIONAL CONFERENCES:

1. D.V. Ravishanker, Dr. P. Ram Reddy, M.A.S. Srinivasulu, C. Karthik, and N. Sateesh, Achieving safety and weight reduction in automobiles with application of composite materials(An experiment on leaf spring) National seminar on Mordern Trends in Automobile (NSMTA-2002), in Rajarambapu Institute of Technology, Rajaramnagar, Sakharale, Dist: Sangli (MS), India, 1-2 August, 2002, pp.162 165.

2. N.Sateesh, Development of an integrated system for cam profile generation and manufacturing using SLS process, IV National conference on Trends in Mechanical Engineering (TIME'2010) held on 30th December 2010, P34-39.

3. N. Sateesh, C.S.P. Rao, and T.A. Janardhan Reddy ,Design of Cam-Follower Motions using Bezier Polynomials, National Conference on Factory Automation Robotics and Soft Computing (FARSC-2007), National Institute of Technology, Warangal, India, 18- 19 January, 2007, pp.333-336.

4. N.Sateesh, Design, Fabrication and Analysis of Catalytic Converter, National Conference on State of the Art Technologies in Mechanical Engineering(NCSAME- 2006), JNTUH, Hyderabad, India, 5-6 May,2006, pp.350-355.

5. N. Sateesh, C.S.P. Rao, and T.A. Janardhan Reddy, Integrated Design and Analysis of Disc Cams, National Conference on Recent Advances in Manufacturing Engineering (RAMT’06), Velammal Engineering College, Chennai (Tamilnadu), India, 3 rd Feb 2006, pp. 207-212.

6. N.Sateesh, M.Chandra Sekhara Reddy, and L. Syam Sundar, Improvement in Motion Characteristics of Cam-Follower Systems, National Conference on Computer Applications in Mechanical Engineering (CAME-2005), J.N.T.U College of Engineering, Anantapur (A.P.),India, 21 st Dec 2005, pp. 25-29.

7. M.Chandra Sekhara Reddy, N.Sateesh, and A. Padma Rao, A CAD/CAM System for Optimization of Plate-Cam Size, National Conference on Computer Applications in Mechanical Engineering (CAME-2005),J.N.T.U College of Engineering, Ananthapur (A.P.),India, 21 st Dec 2005, pp. 30-34.

8. N.Sateesh, Integrated System for Design of Disc Cams, National Conference on Advances in Mechanical Engineering Sciences (NACAMES-04), Sri Siddhartha Institute of Technology, Tumkur (Karnataka), Sept 24-25, 2004, pp 31-36.

9. N. Sateesh, C.S.P. Rao, and T.A. Janardhan Reddy, Computer Aided Design and Manufacturing System for Cylindrical Cams, National Conference on Advanced Materials and Manufacturing Techniques (AMMT), JNTU College of Engineering, Hyderabad and CITD, Hyderabad, 8-9, March, 2004 pp. 144-149.

PhD Supervision

Ph.D supervision

  • Scholar name: V. Rajesh, Title: “Investigation carbon fiber composites with different environmental conditions”, Vignan University, Guntur, AP. Admission: April 2016
  • Scholar name: J Chandrasekhar, Title: “Optimization of Machining process parameters in turning using various techniques” JNTUH, Hyderabad, July 2016

M.Tech supervision: 12completed 3 Ongoing

Professional Work

FDP/Workshops organized:

  • A one week workshop on 3D printing, GRIET, Hyderabad 06-11 Aug 2018
  • Workshop on “Design Smarter Using PTC Creo 4.0”GRIET,Hyderabad, 07-08 Nov 2018
  • One week short-term training programme on “Modelling and Manufacturing” GRIET, Hyderabad12-17 Dec 2016.
  • FDP Programme on advancements in MEMS and NEMS technologies, GRIET, Hyderabad, 19-21 Nov 2015
  • Technitude2K12, Vijay College of Engineering for Women, Nizamabad 11-12 Oct 2012
  • Technitude2K13, Vijay College of Engineering for Women, Nizamabad 04-05 Oct 2013

FDP/Workshops attended:

  • Short term training programme on “Responsive Manufacturing”, 21st March to 1st April 2005, Two weeks, NITW Warangal
  • Short term training programme on “Modeling and Simulation of Engineering Systems”7th to 19th July 2008, (Two weeks), NITW Warangal
  • Short term training programme on CNC turning and Milling training09-14 Sep, 2002 (One week), MTAB Chennai.
  • Short term training on “Quality Improvement Programme”(Technical teaching Competencies) 01-05 July 2003(One week), Technical Teachers Training Institute, Chennai
  • One year apprentice training 23-7-1993 to 22-7-1994(One year) Praga Tools, Hyderabad
  • One week Short –term training programme on Modelling and Manufacturing, 12-17 Dec 2016(One week) GRIET, Hyderabad
  • Seminar: “Metallurgy for Non-Metallurgists” 29-30,January 2015-MGIT, Hyderabad
  • Workshop: TEQIP workshop on “MEMS & NEMS(Design and Fabrication)”, 15-19 Dec 2014 (One week), IIT, Hyderabad
  • Work shop: “Simulation and Manufacturing Systems”,7-9 October 2004-Department of Mechanical Engineering, NITW Warangal
  • Work shop: On “Additive Manufacturing” ,25-27 March 2015-Department of Mechanical Engineering GRIET, Hyderabad
  • Workshop: On “CADEM”28-29 January 2005-JNTUH, Hyderabad and CADEM, Bangalore
  • Seminar: “Advanced Manufacturing Systems”30th July 2009, Department of Mechanical Engineering, University College of Engineering, Osmania University, Hyderabad
  • Workshop on “ Best practices in Teaching-Learning Methods and NBA accreditation process 24-26 August 2015-ESCI, Hyderabad
  • FDP on “Guide to Passionate Teacher” 29th June to 4th July 2015 (One week), GRIET, Hyderabad
  • FDP on “Advancements in MEMS and NEMS technologies”19-21 Nov 2015, GRIET, Hyderabad
  • STTP on Nano, Micro and Bulk Material Processing and Nanotechnology, 20 March 2017 to 26 March 2017, GRIET, Hyderabad
  • FDP on” Foundation Programme in ICT for Education”, IIT Bombay , 3 August 2017 to 7 Sept 2017, (5 weeks), GRIET, Hyderabad
  • FDP on Thermal and Fluid Analysis: CFD approach , Department of Mechanical Engineering GRIET, Hyderabad, 27th Feb 2017 to 4th March 2017 (One week) GRIET, Hyderabad
  • Workshop on “Design smarter using PTC creo4.0” Department of Mechanical Engineering GRIET, Hyderabad, 7 Nov 2017to 8 Nov 2017-GRIET, Hyderabad
  • Seminar on “Launch of Siemens Certified Professional Program”, Core EL Technologies Pvt Ltd, Bangalore, 20 Dec 2017to 20 Dec 2017-GRIET, Hyderabad

Conferences presented/ attended:

  • Effect of Moisture on GFRP Composite Materials 4th International Conference on Materials Processing and Characterization Elsevier-Material today Proceedings 28-9 March 2015, GRIET, Hyderabad
  • Topology optimization using solid isotropic material with penalization technique for additive manufacturing, 5th International Conference on Materials Processing and Characterization (ICMPC-2016), Elsevier-Proceedings, 12-13 March 2016 GRIET, Hyderabad
  • An Investigation on RTM Process Parameters and their Influence on Impact Failure Behavior of FRP Laminates 5th International Conference on Materials Processing and, Characterization (ICMPC-2016), Elsevier-Proceedings, 12-13 March 2016,GRIET, Hyderabad
  • Investigation of Carbon Composites Subjected to Different Environmental Conditions.5th International Conference on Materials Processing and Characterization (ICMPC-2016), Elsevier-Proceedings, 12-13 March 2016 GRIET, Hyderabad
  • A Design System for Complex Profiles of Machine Members Using a Synthetic Curve18th International Conference on Sustainable Urban Environment (ICSUE-2016), 4-5 February 2016 World Academy of Science, Engineering and Technology, Melbourne, Australia,
  • Design, Fabrication and Testing of GFRP Leaf spring National Conference on: “State of Art of Technologies in Mechanical Engineering (NCSAME-2006)” 5-6 May 2006 Of Mechanical Engineering, JNTUH, Hyderabad
  • Design of Cam-follower Mechanisms using Rational B-Splines International Conference on: “Advanced Materials and Manufacturing Technologies (AMMT), 18-20 Dec 2014, Dept. Of Mechanical Engineering, JNTUH, Hyderabad
  • Integrated system for Design of Disc Cams, National Conference on: Advances in Mechanical Engineering Sciences (NACAMES-04), 24-25 Dec 2004Dept. Of Mechanical Engineering and Dept. of Industrial Engineering &Management, Sri Siddhartha Institute of Technology, Tumkur, karnataka
  • Improvement in Motion characteristics of Cam-follower systems.National Conference on: Computer Application in Mechanical Engineering”, 21st Dec 2005, Dept. of Mechanical Engineering, JNTU, Anantapur
  • Computer Aided Design and Manufacturing System for Cylindrical Cams,National Conference on:“Advanced Materials & Manufacturing Techniques(AMMT-2004)”08-09 March 2004 of Mechanical Engineering, JNTUH, Hyderabad
  • Design cam follower Motion using Bezier Polynomials National Conference on: “Factory Automation, Robotics and Soft Computing”, 18-19 January 2007, Dept. of Mechanical Engineering, NITW Warangal
  • Thermal analysis of Carbon Composites Subjected to Various Atmospheric Conditions7th International Conference on Materials Processing and Characterization (ICMPC-2017), 17-19 March 2017,GRIET, Hyderabad

Invited Lectures and Chairmanships at national or international conference/seminar etc.

  • Flexible Manufacturing Systems, IMPETUS-2k10,20/03/2010 Srinivas Reddy Institute of Technology, Armoor, Nizamabad
  • Computer Aided Manufacturing, IMPETUS-2k11, 15-16 March 2011, Srinivas Reddy Institute of Technology, Armoor, Nizamabad
  • Finite Element Methods CONFLUENCE 2K11, 24 March 2011, Vijay Rural Engineering College, Nizamabad
  • Synthetic Curves, CONFLUENCE 2K12, 02nd April 2012, Vijay Rural Engineering College, Nizamabad
  • Flexible Manufacturing Systems, Technitude2K12, 11-12 Oct 2012, Vijay College of Engineering for Women, Nizamabad,
  • Group Technology, CONFLUENCE 2K13, 20 March 2013, Vijay Rural Engineering College, Nizamabad
  • Design of Cam-follower Mechanisms Technitude, 2K13 04-05 Oct 2013, Vijay College of Engineering for Women, Nizamabad
  • Resource person ,STTP on Modelling and Manufacturing”, 12-17 Dec 2016, GRIET, Hyderabad
  • Chaired person, 4th International Conference on Materials Processing and Characterization (ICMPC-2015), 14-15 March 2015,GRIET, Hyderabad
  • Chaired Person, 18th International Conference on Sustainable Urban Environment (ICSUE-2016), 4-5 February 2016 World Academy of Science, Engineering and Technology, Melbourne, Australia.
  • Chaired person, 5th International Conference on Materials Processing and Characterization (ICMPC-2016), Elsevier-Proceedings, 12-13 March 2016, GRIET, Hyderabad
  • Chaired person, 7th International Conference on Materials Processing and Characterization (ICMPC-2017), 17-19 March 2017 ,GRIET, Hyderabad
  • Chaired person, 8th International Conference on Materials Processing and Characterization (ICMPC-2017), 9-11 March 2018 ,GRIET, Hyderabad

Professional Membership:

  • Fellow Institute of Engineers (life member), FIE (F-1232572)
  • Life member of the Institute of Indian Foundry Men (IIFM) and
  • Member of ASME, USA. (1007900988)

Visits Abroad

Visit abroad:

Invited as Chaired Person, 18th International Conference on Sustainable Urban Environment (ICSUE-2016), 4-5 February 2016 World Academy of Science, Engineering and Technology, Melbourne, Australia,

Quick Links

Rankings MOUs People-Faculty List Transport Journals Staff Publications Infrastructure Pragnya 90.4 FM Radio Support Services

Important Links

Scopus SCI List Patents PhD's Awarded ICT @ GRIET Swayam Prabha TEQIP PHASE-II Grant Professional Associations

Student Events

Spirals Spices Rhythms Pragnya PULSE

Special Days

Annual Day Graduation Day Reudo Alumni Day


© Copyright 2018 - All Rights Reserved www.griet.ac.in