Dr. Anshuman Kumar
graduated in Mechanical Engineering from West Bengal University of Technology,
Kolkata, West Bengal, in 2010. He has completed his master's degree from NIT Rourkela,
Odisha, in Production Engineering specialization. He has been awarded a doctorate degree
in Mechanical Engineering from NIT Rourkela, 2018. He has 5 years of teaching and research experience.
His areas of interest are in Non-conventional machining processes, Solid-state Welding processes,
Multi-Objective and Hybride Optimization techniques, modeling, and simulation.
He has published more than 20 papers in international journals and conferences.
He is guiding 2 Ph.D. students and presently working as Associate Professor in this institution.
Contact details:
Dr. Anshuman Kumar
Associate Professor
Department of Mechanical Engineering
Gokaraju Rangaraju Institute of Engineering and Technology
1. Kumar, Anshuman, and Chandramani Upadhyay. "Experimental investigation and optimization
of machining performance characteristics during WEDM of inconel 718: On evaluation of wire electrodes
and advanced parameter techniques." Proceedings of the Institution of Mechanical Engineers,
Part C: Journal of Mechanical Engineering Science (2021): 09544062211023115. (Impact factor:1.76)
2. Kumar, Gajula Sri Venkata Seshu, Anshuman Kumar, S. Rajesh, Rama Bhadri Raju Chekuri, and Venkatesa Prabhu Sundaramurthy.
"Experimental and thermal investigation with optimization on friction stir welding of nylon 6A using Taguchi and microstructural
analysis." Advances in Mechanical Engineering 13, no. 10 (2021): 16878140211050737.(Impact factor: 1.7)
3. Seshu Kumar, G. S. V., Anshuman Kumar, S. Rajesh, Rama Bhadri Raju Chekuri, and Amsalu Gosu Adigo.
"Experimental Investigation and Optimization on Friction Stir Welding of Nylon 6A Using Taguchi and
ANOVA with Microstructural Analysis." Advances in Materials Science and Engineering 2021 (2021). (Impact factor: 1.7)
4. Kumar, Anshuman, and Chandramani Upadhyay. "Experimental investigation on WEDM performance analysis
using grey-fuzzy integrated with TLBO algorithm for Inconel 625: comparison with GA and SA." World Journal of Engineering (2021).
5. Kumar, Anshuman, Kumar Abhishek, K. Vivekananda, and Chandramani Upadhyay. "Experimental study
and optimization of process parameters during WEDM taper cutting." In Soft computing for problem solving,
pp. 721-736. Springer, Singapore, 2019.
6. Kumar, Anshuman, Chandramani Upadhyay, and Vivekananda Kukkala. "Study of Surface Characterization
and Parametric Optimization during Wire Electric Discharge Machining for Inconel 625." Materials Science
Forum. Vol. 978. Trans Tech Publications Ltd, 2020.
7. Kumar, Anshuman, K. Vivekananda, and Kumar Abhishek. "Experimental investigation and optimization of
process parameter for Inconel 718 using wire electrical discharge machining." Journal of Advanced Manufacturing
Systems 18.03 (2019): 339-362.
8. Kumar, Anshuman, and Kumar Abhishek. "Influence of process parameters on MRR, kerf width and surface roughness
during WEDM on Inconel 718: performance analysis of electrode tool material." International Journal of Industrial
and Systems Engineering 30.3 (2018): 298-315.
II. INTERNATIONAL CONFERENCES:
1. Kumar, Anshuman, Chinmaya P. Mohanty, R. K. Bhuyan, and Abdul Munaf Shaik. "Performance analysis
and optimization of process parameters in WEDM for Inconel 625 using TLBO couple with FIS." In Soft
computing for problem solving, pp. 893-905. Springer, Singapore, 2020.
2. Kumari, Soni, Din Bandhu, Anshuman Kumar, Rajiv Kumar Yadav, and K. Vivekananda. "Application of
utility function approach aggregated with imperialist competitive algorithm for optimization of turning
parameters of AISI D2 steel." In Recent Advances in Mechanical Infrastructure, pp. 49-57. Springer, Singapore, 2020.
3. Vivekananda, K., Anshuman Kumar, and S. K. Sahoo. "Prediction of UVAT response parameters by using
linear regression analysis." Materials Today: Proceedings 18 (2019): 4840-4846.
4. Patel, Parthkumar, Bhavdeep Nakum, Kumar Abhishek, V. Rakesh Kumar, and Anshuman Kumar. "Optimization
of surface roughness in plasma arc cutting of AISID2 steel using TLBO." Materials Today: Proceedings 5, no. 9 (2018): 18927-18932.
5. Kumar, Anshuman, Kumar Abhishek, K. Vivekananda, and K. P. Maity. "Effect of wire electrode materials
on die-corner accuracy for Wire Electrical Discharge Machining (WEDM) of Inconel 718." Materials Today:
Proceedings 5, no. 5 (2018): 12641-12648.
6. Kumar, Anshuman, Himadri Majumder, K. Vivekananda, and K. P. Maity. "NSGA-II approach for
multi-objective optimization of wire electrical discharge machining process parameter on inconel 718." Materials Today:
Proceedings 4, no. 2 (2017): 2194-2202.
7. Kumar, Anshuman, Himanshu Mishra, K. Vivekananda, and K. P. Maity. "Multi-objective optimization
of wire electrical discharge machining process parameterson Inconel 718." Materials Today: Proceedings 4,
no. 2 (2017): 2137-2146.
8. Kumar, Anshuman, Dillip Kumar Bagal, and K. P. Maity. "Numerical modeling of wire electrical discharge
machining of super alloy Inconel 718." Procedia Engineering 97 (2014): 1512-1523.
Organized an International Conference as Organizing Secretary in June 2021 called
ICICME2021 by the Department of Mechanical Engineering, KLEF
Organized an International Conference as Organizing Secretary in December 2020 called
ICRDME-2020 by the Department of Mechanical Engineering, KLEF
Conferences presented / attended:
Performance Analysis and Optimization of Process Parameters in WEDM
for Inconel 625 Using TLBO Couple with FIS, 8th International Conference.
Soft Computing for Problem Solving - SocProS 2018, December 17-19, 2018.
Vellore Institute of Technology, Tamil Nadu, India.
Application of utility function approach aggregated with imperialist competitive
algorithm for optimization of turning parameters of AISI D2 steel. The conference
Recent Advances in Mechanical Infrastructure (ICRAM 2020) held at IITRAM, Ahmedabad,
India, from 21-23 August 2020.
Prediction of UVAT response parameters by using linear regression analysis,
7th International Conference on Materials Processing and Characterization (ICMPC-2016),
Elsevier-Proceedings, 16-18 March 2018 GRIET, Hyderabad
Optimization of surface roughness in plasma arc cutting of AISID2 steel using TLBO,
9th International Conference on Materials Processing and Characterization (ICMPC-2016),
Elsevier-Proceedings, 8-10 March 2019 GRIET, Hyderabad
Optimisation of machining parameters using grey relation analysis integrated with harmony
search for turning of aisi d2 steel, Part of special issue: International Conference on
Materials Manufacturing and Modelling, ICMMM - 2017, 9 - 11, March 2017
Effect of wire electrode materials on die-corner accuracy for Wire Electrical Discharge Machining
(WEDM) of Inconel 718, International Conference on Materials Manufacturing and Modelling,
ICMMM - 2017, 9 - 11, March 2017
NSGA-II Approach for Multi- Objective Optimization of Wire Electrical Discharge Machining Process
Parameter on Inconel 718, 5th International Conference on Materials Processing and Characterization
(ICMPC-2016), Elsevier-Proceedings, 12-13 March 2016 GRIET, Hyderabad
Multi-objective optimization of wire electrical discharge machining process parameters on Inconel 718,
5th International Conference on Materials Processing and, Characterization (ICMPC-2016), Elsevier-Proceedings,
12-13 March 2016,GRIET, Hyderabad
Numerical Modeling of Wire Electrical Discharge Machining of Super Alloy Inconel 718, 12th Global Congress
on Manufacturing and Management, GCMM - 2014
Professional Membership:
SEA India (Annual Membership)
Powder Metallurgy Association of India (Life Time member)
